fishingmag.co.nz

Zonker Trout and Salmon Lure or Streamer Fly with Allan Burgess

Departments
NZ Fishes
Freshwater Places
Saltwater Places
Surfcasting Places
Knots
Rigs
Sinkers
Fish Hooks
How To
Feathered Lures
Dry Flies
Wet Flies
Nymphs
Saltwater Fly
Baits
Freshwater Lures
Salmon Lures
Saltwater Lures
Competitions
YouTube Videos
4x4s Vehicles
Fishing Photos
Whitebaiting
Trout Fishing
Salmon Angling
Deep Sea Fishing
Surfcasting
Game Fishing
Boats
Books
Tackle
Message Board
Home
Zonkers for Salmon and Searun Brown Trout
A Zonker Lure tied with white rabbit pelt. White thread used at the tail makes it almost invisible.
A Zonker Lure tied with white rabbit pelt. White thread used at the tail makes it almost invisible. Painted eyes would add even more realism.
Zonker 1. Begin by under-binding along hook and finishing near bend.  Fishingmag.co.nz
1. Begin by under-binding along hook and finishing near bend. I have used yellow thread so you can see it.
Zonker Lure 2. Bend and cut the aluminum foil folded over half a dozen times to make it strong enough. Trim to shape. Be sure to leave the hook barb well clear of the foil.  Fishingmag.co.nz
2. Bend and cut the aluminum foil after folding it over half a dozen times to make it strong enough. Trim to shape. Be sure to leave the hook barb well clear of the foil.
Zonker Lure 3. Slide the Mylar tube over the foil and secure at both ends. Using a lighter colour at the tail gives a better end result.Trim off excess Mylar at the head. Fishinging.co.nz
3. Slide the Mylar tube over the foil and secure at both ends. Using a lighter colour at the tail gives a better end result. Trim off excess Mylar at the head.
Zonker Lure 4. Secure a strip of rabbit pelt (skin side down) to the top of the hook with thread at each end. A better result is achieved if you cut the peft with a taper at each end. Fishingmag.co.nz
4. Secure a strip of rabbit pelt (skin side down) to the top of the hook with thread at each end. A better result is achieved if you cut the pelt with a taper at the ends. Liberally apply head cement over the Mylar tube to make it stronger and more resilient. Cement the head and the thread holding on the pelt at the tail.
The Olive and Gold Zonker is an ideal lure for fishing a South Island West Coast lake or river. Here the lure is tied on a size 6 hook. Note that if the lure is to be used for fly casting a slightly shorter tail will prevent it from wrapping around the hook shank when casting.
The Olive and Gold Zonker is an ideal lure for fishing a South Island West Coast lake or river. Here the lure is tied on a size 6 hook. Note that if the lure is to be used for fly casting a slightly shorter tail will prevent it from wrapping around the hook shank when casting.

Zonker flies are one of my favourites. It is a pattern that originally came from America. Zonkers, like most flies, come in many variations. But the basic Zonker design includes a body made from Mylar tube. This stuff creates a fish scale appearance that is almost impossible to make any other way.

Regular readers will be aware that I mostly fish a sunken line for searun brown trout in the lower reaches of our big east coast rivers. The Zonker is an ideal pattern for this, as the finished lure makes an excellent silvery imitation; silveries being the main food for searun brown trout in these waters over summer.

The Zonker has many variations but the one I like is tied with pearl mylar and a strip of rabbit skin. I also like to add a little peacock sword as a topping for that little extra dash!

The Zonker is a somewhat fiddly pattern to tie. Don't let this put you off. The results are very worthwhile.

Start with a size 2 lure hook. I use Mustad 3666 and Black Magic Lure Hooks. Bind the hook with a few strands of Flashabou and coat with cement.

Next comes the tricky part. You have to form a body shape as a former for the Mylar tube to go over. For this I use aluminum foil folded over half a dozen times to make it strong enough. Trim to shape with scissors as shown. Instead of foil you can use Trimbrite metal strip, only the sports stores don't stock it! You can also make a former from the plastic bottoms of margarine containers and Super Glue the two sides in place (according to Mike at the Complete Angler).

Bind the foil on at the back to hold it in place. Cut a length of tube at least 10mm longer than you think you'll need and carefully pull the sting out of the inside with the tips of you scissors.

Slip the now hollow tube over the former and tie-off at the back. Leave about 200mm of thread and cut off. Tie-off the Mylar at the head. This is easier if you push the Mylar forward to take up any slack. Trim off the waste material.

Lastly, tie on the strip of rabbit skin front and back and trim thread. If you use white thread at the rear it looks even better. Some tyers add a matching hackle collar at this stage but I have never bothered with this.

The Zonker fly really comes to life if you paint on black and white eyes.

I was fishing this pattern once at the mouth of the Rakaia River when the bloke fishing next to me commented that I had foul hooked a silvery. “No,” I said, “that is my lure.” I have also caught many searun brown trout on Zonkers in the Waimakariri River.

You might also be interested in these New Zealand trout lure patterns: Hope's Silvery , Mrs Simpson and Hamills Killer, the Yellow Rabbit Lure, Silicon Rubber Trout Flies, Beetle Trout Flies, Luminous Trout Flies, Muddler Minnow . These lures will catch other fish as well as trout. You can read about it here: Searun Trout, Salmon and Kahawai. Fishing with the Canterbury Lure Rod. Tying the Red Shadow Lure with John Hey.

Trout Fly Fishing in New Zealand. Return to Feathered Lures for Trout and Salmon.

 
 

 

© fishingmag.co.nz 1999 - 2012